1. Measure diameter
See image for details.
Connector guide
Identify your connector
Do not identify a connector from voltage alone. Compare the physical interface before ordering an adapter.
2. Measure pin spacing
Measure centre-to-centre spacing and pin diameter. 6 mm is the standard space.
3. Check keying
Our connectors with swicth currently known notches, flats, slots.
Known connector families
| M15 family | Photos and confirmed dimensions to be added. |
| M17 family | Two-pin connector used by some generic low-voltage systems. |
| KS M18 | OpenLVB name for the larger connector found on selected Konstsmide low-voltage products. |
Measure first. This guide is deliberately self-service. If the dimensions do not match, do not order based only on appearance or brand.